Choosing the Right Roofing System Matters
Every roofing system performs differently depending on the building structure, exposure, and usage. We help property owners and managers select the right system based on durability, cost-efficiency, and long-term maintenance requirements.
How We Recommend the Right Roofing System
Our recommendations are based on a detailed inspection and evaluation of your building, including:

  • Roof size and structure
  • Drainage and slope
  • Exposure to weather and traffic
  • Budget and lifecycle expectations

We focus on long-term performance — not just short-term solutions.
SBS Modified Bitumen Roofing in Toronto & GTA
SBS (Styrene-Butadiene-Styrene) modified bitumen is one of the most reliable flat roofing systems for commercial and industrial properties in Toronto. Designed as a multi-layer waterproofing system, SBS roofs are built to withstand heavy use, extreme weather, and long-term exposure.
For property owners looking for durability, proven performance, and long-term value, SBS remains the industry standard.

Flat roofs fail for a reason — open seams, membrane deterioration, ponding water, and poor installation.


SBS systems are designed to address these issues through:

  • Multi-layer protection (base + cap sheet)
  • Reinforced membrane for strength and flexibility
  • Torch-applied or heat-welded seams for superior waterproofing

This creates a continuous, durable barrier that protects the building structure from water infiltration.

WHY PROPERTY OWNERS CHOOSE SBS
  • Built for Long-Term Performance
    SBS systems are engineered for durability and can perform for decades when properly installed and maintained.
  • Excellent Resistance to Damage
    The reinforced membrane resists punctures, foot traffic, and rooftop equipment wear.
  • Reliable in Toronto Climate
    Handles freeze-thaw cycles, temperature fluctuations, and heavy rainfall.
  • Serviceable and Repair-Friendly
    Allows for targeted repairs and maintenance without full system replacement.
  • SBS roofing is ideal for

    • Commercial buildings
    • Industrial facilities
    • Warehouses and distribution centers
    • Multi-unit residential properties
    • Flat and low-slope roof systems
  • We install and service

    • 2-ply SBS systems (base + cap sheet)
    • Torch-applied SBS systems
    • SBS systems with protective cap sheets
    • Full roof replacements and system upgrades
    • SBS repairs and tie-ins to existing systems
    All systems are installed using proper preparation, insulation compatibility, and manufacturer-approved methods.
  • Common issues we solve

    • Active roof leaks
    • Open or failing seams
    • Blisters and membrane deterioration
    • Ponding water areas
    • Poor previous installations
    Our approach focuses on identifying root causes — not just surface repairs.
WHY AXCESS ROOFING
Not Sure If SBS Is the Right System for Your Roof?
We’ll inspect your roof and recommend the best solution based on condition, structure, and long-term performance goals.
TPO Roofing Systems in Toronto & GTA
TPO (Thermoplastic Polyolefin) is a modern single-ply roofing system designed for efficiency, clean installation, and performance on large commercial roofs. It is widely used for buildings where weight, reflectivity, and installation speed are important factors.

TPO systems are built using heat-welded seams, creating a continuous waterproof membrane across the roof surface.


Key advantages include:


  • Reflective surface that reduces heat absorption
  • Strong welded seams for reliable waterproofing
  • Lightweight system ideal for large spans
  • BEST APPLICATIONS

    TPO is commonly used for:

    • Warehouses and distribution centers
    • Retail plazas
    • Commercial buildings with large roof areas
    • Retrofit projects where weight is a concern
  • WHAT TO CONSIDER

    TPO systems require proper installation and detailing. Performance depends heavily on:

    • seam welding quality
    • substrate preparation
    • drainage design
    Our approach ensures correct installation methods and long-term system performance.
EPDM Rubber Roofing in Toronto & GTA
EPDM is a flexible rubber roofing membrane designed for flat and low-slope roofs. It is a cost-effective and reliable solution for both residential and smaller commercial applications.

EPDM is known for its flexibility and adaptability, especially in changing weather conditions.

Key advantages include:

  • Excellent flexibility in extreme temperatures
  • Durable and long-lasting material
  • Efficient repair and maintenance options
  • BEST APPLICATIONS

    EPDM is ideal for:

    • Residential flat roofs
    • Garages and additions
    • Smaller commercial buildings
    • Low-slope roofing systems
  • WHAT TO CONSIDER

    EPDM is a practical solution when budget and flexibility are priorities. However, system performance depends on:

    • proper installation
    • secure seams and adhesion
    • correct drainage
    We ensure installation meets system requirements for long-term reliability.
SBS vs TPO vs EPDM Roofing Systems
Each roofing system offers different advantages depending on your building, budget, and long-term goals. Below is a comparison to help understand which system may be the right fit.
  • SBS systems are typically recommended for long-term performance and durability, especially on commercial and high-traffic roofs.

  • TPO is a strong option for large buildings where energy efficiency and installation efficiency are priorities.

  • EPDM is a practical solution for smaller roofs and residential applications where flexibility and cost-effectiveness are key.
Not Sure Which Roofing System Is Right for Your Building?
We’ll assess your roof and recommend the most effective system based on structure, condition, and long-term performance.
Asphalt Shingle Roofing in Toronto & GTA
We install high-quality asphalt shingle roofing systems using trusted manufacturers including IKO and CertainTeed. Our approach focuses on proper installation, ventilation, and system performance — not just appearance.

As a CertainTeed SELECT ShingleMaster™ contractor, Axcess Roofing meets the highest standards for installation quality, training, and warranty eligibility.
  • WHY SHINGLE ROOFING

    Asphalt shingles remain the most widely used roofing system for sloped residential roofs due to their balance of durability, cost-efficiency, and design flexibility.
    Key advantages include:

    • Proven performance in Toronto climate
    • Wide range of colors and architectural styles
    • Strong wind and weather resistance
    • Cost-effective full roof replacement solution
  • IKO & CERTAINTEED SYSTEMS

    We work with industry-leading manufacturers to ensure long-term performance and reliable warranty coverage:

    • IKO — trusted, durable shingle systems designed for Canadian weather conditions
    • CertainTeed — premium architectural shingles with advanced performance and extended warranty options
CERTAINTEED SELECT SHINGLEMASTER™ BENEFITS
As a SELECT ShingleMaster contractor, Axcess Roofing is part of a limited group of certified roofing professionals qualified to offer enhanced installation standards and extended warranty options.
  • Certified Installation Standards
    Our team is trained and certified to install CertainTeed roofing systems according to strict manufacturer guidelines.
  • Extended Warranty Eligibility
    Access to upgraded warranty options, including SureStart™ and SureStart PLUS™ extended coverage.
  • Proven Workmanship Quality
    Certification requires demonstrated experience, ongoing training, and a strong track record of completed projects.
  • Proper System Installation
    We install complete roofing systems — including underlayment, ventilation, flashing, and accessories — not just shingles.
  • Manufacturer-Backed Confidence
    Your roof is installed to meet manufacturer requirements, ensuring long-term performance and valid warranty protection.
  • OUR APPROACH TO SHINGLE ROOFING

    We don’t treat shingle roofing as a basic installation. Every project includes:

    • Proper deck preparation and inspection
    • Ice & water shield protection in critical areas
    • Ventilation system evaluation and correction
    • Flashing and penetration detailing
    • Clean installation and site protection
    • Our focus is on long-term system performance, not shortcuts.
  • BEST APPLICATIONS

    Shingle roofing is ideal for:

    • Residential homes
    • Sloped roofing systems
    • Full roof replacements
    • Renovation and upgrade projects
Planning a Roof Replacement?
We’ll inspect your roof and recommend the right shingle system based on your home, budget, and long-term goals.
Cedar Roofing Systems
Cedar roofing offers a premium natural appearance combined with durability and insulation benefits when properly installed and maintained.

Why it’s used:
  • Natural and high-end aesthetic
  • Good insulation properties
  • Long lifespan with maintenance

Best for:
  • Custom homes
  • High-end residential properties
Recent Flat Roofing Projects in Toronto & GTA
Commercial Roof Replacement, Markham
Commercial Roof Restoration, North York
Warehouse, Scarborough
Commercial Roof Replacement, Vaughan
Commercial Roof Replacement, Mississauga